APR 980cc MPI Injector Kit
Out of Stock - Call to check
Part
APR MS100195
High horsepower configurations often require more fuel, especially on applications where ethanol is used. The APR 980cc MPI Injector Upgrade Kit includes an upgraded high-flow multiport injection (MPI) injector and harness necessary to satisfy high horsepower builds. The kit uses a compact and extended tip Bosch EV 14 injector that supports Ethanol and Methanol and flows 980cc/min at 3 bar. A high quality 2 wire harness with braided wire sheathing converts the Bosch Jetronic connector to the necessary factory style connector making this upgrade plug-and-play with an associated ECU upgrade.
- Bosch EV 14 CKxT MPI injector (0 280 158 040)
- APR Bosch Jetronic to OEM 2 pin harness
- 980cc/min, 670g/min, or 89lb/hr @ 3 bar (n-heptane)
- Supports up to 8 bar of use in motorsport configurations
- E85 and M100 compatible
- 30° single cone spray angle with 0° bent angle and 0° gamma angle
- 33.6mm compact body
- 24mm extended tip nozzle
- Top-feed injector
- 12 ohm coil resistance
- 150 mm long harness with braided wire sheathing
- ECU software required for use
- Plug-and-play on 2.5 EA855 EVO & 2.0T EA888 Gen 3, where supported
| Part | APR MS100195 |
|---|---|
| Manufacturer Part Number | MS100195 |
| Brand | APR |
| Body Style | EV14 |
| Connector Series | EV6 |
| Emission Code | 4 |
| Impedance | High |
| Part Type | Fueling |
| Rated Injector Flow | 89 lb/hr |
| Type | product |
| Item Returns | This item can be returned |
| Body Length | N/A |
|---|---|
| Body Style | EV14 |
| Brand | APR |
| Connector | Bosch Jetronic to OEM |
| Connector Series | EV6 |
| Direct Fit | Yes |
| Emission Code | 4 |
| Impedance | High |
| Max Pressure (Bar) | 8 |
| MPI Injector CC | 980cc/min @ 3 bar |
| MPI Injector Count | 1 |
| O-Ring to O-Ring | N/A |
| Product Type | Fueling |
| Rated Injector Flow | 89 lb/hr |
| Warning | California Proposition 65 |
Write Your Own Review
Related Products
OEM Injectors - B6 A4 Stage 1+
Out of stock
People Also Viewed
