B&M Hi-Tek Aluminum Differential Cover for Ford Super 8.8 - Black
Our engineers designed the line of Hi-Tek differential covers to not only look good but address a number of weaknesses of the factory stamped steel covers. First, they started by constructing the covers of thick A356.0-T6 aluminum, which dissipates heat much faster than the factory steel unit keeping the fluid temperature lower under high-stress loads vs. a steel cover. Then for added durability, we added a reinforced center bar for extra strength along with load bolts to help prevent bearing cap deflection under severe loads. The internal shape of the cover retains the smooth round back internally to help keep the fluid flow going over the ring gear to properly lubricate the gears and bearings. Additional features include a magnetic drain plug for catching ferrous metal particles, MIL-Spec (MIL-A-8625) black anodized finish, machined B&M logo, and all necessary hardware and easy to follow detailed instructions for a quick and simple installation you can do at home. Note: Gasket not included. 2015+ Ford 1/2 ton trucks and SUV's. However each vehicle may have other interfering components and adequate clearance and fitment should be verified prior to purchase & installation. Refer to ID guide and measurement diagram for specifications.
- Load Bolts for Additional Support for Bearing Caps
- Increased Fluid Capacity of 1.13 Quarts
- Magnetic Drain Plug for Easy Servicing
- A356.0-T6 Aluminum Construction
- MIL-Spec Black Anodized Finish
- Over 65 Years of B&M Quality
- Lifetime Limited Warranty
- Machined B&M Logo
| Part | B&M 41296 |
|---|---|
| Manufacturer Part Number | 41296 |
| UPC | 19695952778 |
| Brand | B&M |
| Color Finish | Black Anodized |
| Emission Code | 5 |
| Material | A356.0-T6 Aluminum |
| Part Type | Differential Cover |
| Type | product |
| Additional Fluid Capacity (qts) | 1.13 |
|---|---|
| Bolt Count | 12 |
| Bolt/Studs Included | Yes |
| Brand | B&M |
| California Proposition 65 Chemical Name | Chromium (hexavalent compounds) |
| California Proposition 65 Required | Yes |
| Call Out Size (in) | 2.65 |
| Carrier Main Cap Support | Yes |
| Color/Finish | Black Anodized |
| Differential Cover Bolt Pattern | Ford Super 8.8 |
| Differential Thickness (in) | 3.1 |
| Drain Plug Included | Yes |
| Emission Code | 5 |
| Filler Plug Included | Yes |
| Gasket Included | No |
| Material | A356.0-T6 Aluminum |
| Product Type | Differential Cover |
| Warning | California Proposition 65 |
- Cover
- fill plug
- drain plug
- bolts
- washers
- load bolts
- nuts
- instruction
