Dinan Suspension Link Kit - 2018-2019 BMW M5

Contact for Price
Out of Stock - Call to check
Part
Dinan D280-0020

Dinan's high-performance Rear Suspension Link Kit adds precision and predictability at the limit.

The stock rear toe link setup is built with rubber bushings and a curved forged alloy rod which can easily flex. During hard acceleration and braking, this flex allows the rear wheels to have excessive toe change which ultimately causes the car to be unstable. Dinan stops the flex by replacing the rubber bushings with Teflon-lined machined steel rod ends that significantly reduce pliability while also swapping out the OEM curved bar with a stouter billet aluminum arm, thus adding stability. Like the rear toe links the stock front trailing links also incorporate rubber bushings. Flex in these bushings allows the rear wheels to behave sloppily under heavy loads. Dinan adds precision by replacing these links with billet aluminum arms and precision ball joints just like the ones found in the Dinan front monoball kit.

Have confidence in your F90 M5 when pushing the envelope without the worry of erratic suspension play or sacrificing ride quality and comfort. Whether it be at the drag strip doing quarter-mile runs or simply getting the jump off the line at a stoplight the end result with Dinan's Rear Suspension Link Kit is a more stable and planted driving experience when pushing the car to its limits.

  • Replaces the stock rear toe link & rubber bushings with a precision machined black-anodized aluminum arm and racing-quality rod ends.
  • Rod-ends are Teflon-lined for quiet operation.
  • Rubber boots protect rod ends from environmental damage for long lasting performance and removes the need for constant cleaning. 
  • Replaces the stock forward lower trailing link & rubber bushings with a precision machined black-anodized aluminum arm and precision ball joints.
  • Bearings are nylon-lined for quiet operation. 
  • Dramatically improves vehicle stability during hard cornering.
  • Improves response by eliminating the deflection of the rubber bushings.
More Information
PartDinan D280-0020
Manufacturer Part NumberD280-0020
UPC813725025117
BrandDinan
Emission Code5
Part TypeLink Kit
Typeproduct
Item ReturnsThis item can be returned

BrandDinan
Dinan Point Value1
Emission Code5
Height4
Labor Time (Hours)3
Length22
Product TypeLink Kit
WarningCalifornia Proposition 65
Weight10
Width12

Write Your Own Review
You're reviewing:Dinan Suspension Link Kit - 2018-2019 BMW M5
Your Rating
Related Products
Dinan Control Arms - 2010-2019 BMW 528i/535i/550i/640i/650i
Dinan Control Arms - 2010-2019 BMW 528i/535i/550i/640i/650i
Contact for Price
Dinan Suspension Link kit - 2015-2020 M2/M3/M4
Dinan Suspension Link kit - 2015-2020 M2/M3/M4
Contact for Price
People Also Viewed
Holley EFI Ford Coyote Ti-VCT Sub Harness (2011-2012)
Holley EFI Ford Coyote Ti-VCT Sub Harness (2011-2012)
$435.99
AF9203-275-225 - 90° Silicone Hose Reducer 2-3/4'' - 2-1/4'' (70-57mm) I.D
AF9203-275-225 - 90° Silicone Hose Reducer 2-3/4'' - 2-1/4'' (70-57mm) I.D
$37.17
AF82-9005 - Replacement Oil Pan - Small Block Chevy-Raw Finish
AF82-9005 - Replacement Oil Pan - Small Block Chevy-Raw Finish
$92.60
AF829-16-12 - Male NPT Taper Swivel 90° Hose End 3/4'' to -16AN
AF829-16-12 - Male NPT Taper Swivel 90° Hose End 3/4'' to -16AN
$62.83
Filter Extension, 4L60E
Filter Extension, 4L60E
$76.84
AF64-2026 - Billet Throttle Cable Bracket 4150 Style
AF64-2026 - Billet Throttle Cable Bracket 4150 Style
$112.50
LS Lo-Ram Billet Burst Panel Duct
LS Lo-Ram Billet Burst Panel Duct
$304.43
AF991SS - Weld-On O2 Sensor Bung
AF991SS - Weld-On O2 Sensor Bung
$14.87
AF77-2044BLK - Dual EFI Pump Surge Tank Kit - Black
AF77-2044BLK - Dual EFI Pump Surge Tank Kit - Black
$400.26
AF951-06-10S - AN Flare Expander Female/Male -6AN to -10AN
AF951-06-10S - AN Flare Expander Female/Male -6AN to -10AN
$18.46
Copyright © 2020-present Race Car Engineering. All rights reserved.