APR High Pressure Fuel Pumps - S5 4.2L V8 (Pre Nov 2008)

Contact for Price
Out of Stock - Call to check
Part
APR MS100076
The APR High Pressure Fuel Pump (HPFP) increases maximum volume of fuel the HPFP can deliver by 41% over stock! In doing so, the direct injection fueling system is capable of satisfying fueling requirements set forth by high horsepower setups. This is accomplished by increasing the displacement of the pump using high quality components to exacting tolerances.

How the direct injection system works:
A low pressure fuel pump (LPFP) in the fuel tank delivers fuel to the high pressure fuel pump (HPFP) at roughly 4 to 6 bar. Fuel pressure is then bumped up to a maximum of 136 bar, depending on factory parts, with the HPFP. Finally, high pressure fuel is delivered to the injectors, which spray directly into the cylinders.

The problem:
The volume of fuel the HPFP pump can displace is directly tied to the displacement of the pump (Internal bore size, and camshaft dictated stroke), and engine speed. The pump is driven off of a camshaft. Upgraded supercharger and turbocharger systems are capable of taxing this system, especially in the mid to lower RPM range where fuel volume is lower.

The APR solution:
We dramatically increase the volume of fuel the HPFP can displace at every RPM by increasing the displacement of the HPFP. This is accomplished by increasing the bore diameter of the pump's internal pressurizing cylinder. It's important to understand, despite the name, a HPFP upgrade is not necessary designed to increase the engine's fuel rail pressure. The primary goal is to increase the volume of fuel available, which will keep fuel pressure steady even in the most demanding of situations!

High quality components and extreme tolerances:
The HPFP internals must be machined to extreme tolerances and installed in a clean environment or the pump can easily fail. Dimensional tolerances on the APR HPFP are as tight as .00004" and geometric tolerances are as tight as .00005". The plunger and barrel are created from certified and heat-treated bearing-grade stainless steel and the plunger undergoes a special diamond like coating process for exceptional surfaces hardness and ultra-reliable operation. To prevent float associated with altering the plunger's mass, APR supplies each unit with a properly specified spring. All internal seals are replaced, including the spring seal, and the tip of the pump retains the factory pivoting head to reduce cam follower wear and piston side loading.

Internal testing:
All APR HPFPs are assembled in house under strict assembly guidelines. Each pump is then tested on our test rig to ensure the pumps operate as designed. This step is important for several reasons. It's critical in determining if a pump has a failure from incorrect install, a leaking seal, or a bad solenoid. Secondly, a seized pump on the vehicle at startup can cause damage to the engine's camshaft. By testing each pump, we all but eliminate these possibility.

Proven track record:
APR pioneered HPFP upgrades in the early days of VAG direct injection engines. Soon after, APR became an OEM supplier of HPFP and GDI components to VAG for use in various race cars, racing series, project cars, and concept vehicles. The APR HPFP has been at the center of countless motorsport victories across the globe and has operated with a nearly perfect tract record since the program's motorsport backed inception in 2006. With tens of thousands of pumps sold, APR has a wealth of knowledge, and manufacturing expertise necessary to deliver a product that will and has stood the test of time.

OEM Components:
Critical to the design of the APR HPFP is the use of only genuine Hitachi components, made in Germany, which consists of sensors, pump bodies, and other critical components that must operate with OEM levels of reliability. All APR components are made in the USA using medical grade precision machinery that goes well beyond the tolerances capabilities found at automotive engineering companies.
  • Dramatically increases the volume of fuel displaced by the HPFP by 41%
  • Maintains higher pressures under demanding situations
  • Fully rebuilt in house
  • Fully machine tested and broken in before shipping
  • New factory pumps included
  • Upgraded and weight matched spring
  • DLC coated piston
  • Heat-treated bearing-grade stainless steel material
  • Supports big power
  • .00004" dimensional tolerances
  • .00005" geometrical tolerances
  • Spring seals replaced
More Information
PartAPR MS100076
Barcode810009931959
Manufacturer Part NumberMS100076
UPC810009931959
BrandAPR
Emission Code4
Part TypeHigh Pressure Fuel Pump
Typeproduct

BrandAPR
Emission Code4
Larger BoreYes
Larger PistonYes
New or Rebuilt PumpNew
New SealsYes
New SpringYes
Piston / Bore MaterialBearing-Grade Stainless Steel
Piston CoatingDLC
Product TypeHigh Pressure Fuel Pump
Quantity2
RebuildNo
TestedYes
WarningCalifornia Proposition 65

Write Your Own Review
You're reviewing:APR High Pressure Fuel Pumps - S5 4.2L V8 (Pre Nov 2008)
Your Rating
Related Products
APR Exhaust - Catback System - S3 (8V)
APR Exhaust - Catback System - S3 (8V)
Contact for Price
APR ECU Upgrade - 3.0T (991.2)
APR ECU Upgrade - 3.0T (991.2)
Contact for Price
APR Steering Wheel - Carbon Fiber & Perforated Leather - MK7 GTI/GLI Red (For use with Paddles)
APR Steering Wheel - Carbon Fiber & Perforated Leather - MK7 GTI/GLI Red (For use with Paddles)
Contact for Price
APR Turbo Outlet System - 2.0T EA888.4 - GTI/A3 Platform
APR Turbo Outlet System - 2.0T EA888.4 - GTI/A3 Platform
Contact for Price
APR Brakes - 350x34mm 2 Piece 6 Piston Kit - Front - Black - (PQ35 345mm)
APR Brakes - 350x34mm 2 Piece 6 Piston Kit - Front - Black - (PQ35 345mm)
Contact for Price
APR Roll-Control Stabilizer Bar - Rear - MQB FWD
APR Roll-Control Stabilizer Bar - Rear - MQB FWD
Contact for Price
APR Hoses - Full System - MQB 1.8T/2.0T
APR Hoses - Full System - MQB 1.8T/2.0T
Contact for Price
APR Center Cap - Silver - Flow Formed Wheels
APR Center Cap - Silver - Flow Formed Wheels
Contact for Price
APR Brakes - 380x34mm 2 Piece 6 Piston Kit - Front - Black - (MLB 345mm)
APR Brakes - 380x34mm 2 Piece 6 Piston Kit - Front - Black - (MLB 345mm)
Contact for Price
APR Catback Exhaust System (Valveless) - MK7.5 Golf R
APR Catback Exhaust System (Valveless) - MK7.5 Golf R
Contact for Price
People Also Viewed
2-Step Rev Control for Digital 6AL, PN 6425 or 64253 only
2-Step Rev Control for Digital 6AL, PN 6425 or 64253 only
$253.02
AF9001-150-137 - Straight Silicone Hose Reducer 1-1/2'' - 1-3/8'' (38-35mm) I.D
AF9001-150-137 - Straight Silicone Hose Reducer 1-1/2'' - 1-3/8'' (38-35mm) I.D
$20.15
AF156-15S - Billet Aluminium Dual Hose Separators
AF156-15S - Billet Aluminium Dual Hose Separators
$17.52
AF832-10S - Straight AN Bulkhead -10AN
AF832-10S - Straight AN Bulkhead -10AN
$19.75
SPAL&#174 Electric Fan
SPAL&#174 Electric Fan
$348.64
AF64-2118 - Transmission Cooler Radiator Adapter VE & VF
AF64-2118 - Transmission Cooler Radiator Adapter VE & VF
$76.35
AF615-08S - EFI Fuel Pump Check Valve -8AN (M12 x 1.5mm)
AF615-08S - EFI Fuel Pump Check Valve -8AN (M12 x 1.5mm)
$72.59
AF59-460-40BLK - 2-1/2'' Billet Aluminium Filler Cap
AF59-460-40BLK - 2-1/2'' Billet Aluminium Filler Cap
$56.35
AF816-06-02 - NPT to Straight Male Flare Adapter 1/8'' to -6AN
AF816-06-02 - NPT to Straight Male Flare Adapter 1/8'' to -6AN
$8.98
Copyright © 2020-present Race Car Engineering. All rights reserved.