APR High Pressure Fuel Pump - 2.5 TFSI (Rebuild)

Contact for Price
Out of Stock - Call to check
Part
APR MS100062
Contact for Price
Upgrade your direct injection high pressure fuel pump for dramatically more fuel volume needed on high powered applications.

The APR High Pressure Fuel Pump (HPFP) dramatically increases the maximum volume of fuel the HPFP can deliver. In doing so, the direct injection fueling system is capable of satisfying fueling requirements set forth by high horsepower setups. This is accomplished by increasing the displacement of the pump using high quality components to exacting tolerances.

How the direct injection system works:

A low pressure fuel pump (LPFP) in the fuel tank delivers fuel to the high pressure fuel pump (HPFP) at roughly 4 to 6 bar. Fuel pressure is then bumped up to a maximum of 145 bar, depending on factory parts, with the HPFP. Finally, high pressure fuel is delivered to the injectors, which spray directly into the cylinders.

The problem:

The volume of fuel the HPFP pump can displace is directly tied to the displacement of the pump (Internal bore size, and camshaft dictated stroke), and engine speed. The pump is driven off of a camshaft. Even the factory turbocharger is capable of taxing this system, especially in the mid to lower RPM range where fuel volume is lower.

The APR solution:

We dramatically increase the volume of fuel the HPFP can displace at every RPM by increasing the displacement of the HPFP. This is accomplished by increasing the bore diameter of the pump's internal pressurizing cylinder. It's important to understand, despite the name, a HPFP upgrade is not necessary designed to increase the engine's fuel rail pressure. The primary goal is to increase the volume of fuel available, which will keep fuel pressure steady even in the most demanding of situations!

High quality components and extreme tolerances:

The HPFP internals must be machined to extreme tolerances and installed in a clean environment or the pump can easily fail. Dimensional tolerances on the APR HPFP are as tight as .00004" and geometric tolerances are as tight as .00005". The plunger and barrel are created from certified and heat-treated bearing-grade stainless steel and the plunger undergoes a special diamond like coating process for exceptional surfaces hardness and ultra-reliable operation. to prevent float associated with altering the plunger's mass, APR supplies each unit with a properly specified spring. All necessary internal seals are replaced.

Internal testing:

All APR HPFPs are assembled in house under strict assembly guidelines. Each pump is then tested on our test rig to ensure the pumps operate as designed. This step is important for several reasons. It's critical in determining if a pump has a failure from incorrect install, a leaking seal, or a bad solenoid. Secondly, a seized pump on the vehicle at startup can cause damage to the engine's camshaft. By testing each pump, we all but eliminate these possibility.

Proven track record:

APR pioneered HPFP upgrades in the early days of VAG direct injection engines. Soon after, APR became an OEM supplier of HPFP and GDI components to VAG for use in various race cars, racing series, project cars, and concept vehicles. The APR HPFP has been at the center of countless motorsport victories across the globe and has operated with a nearly perfect tract record since the program's motorsport backed inception in 2006. With tens of thousands of pumps sold, APR has a wealth of knowledge, and manufacturing expertise necessary to deliver a product that will and has stood the test of time.

This is a rebuild of your factory HPFP. Working pumps must be sent to APR.

Pump rebuilds are applicable to the Hitachi Gen III pump found on the 1.4T, 1.8T/2.0T EA888 Gen 1/2, 2.5 TFSI (Gen 1), 3.0T Supercharged, 4.0T V8 (C7/D4), 5.0T V10, and 5.2L FSI V10.

APR High Pressure Fuel Pump - 2.5 TFSI (Rebuild) Features

  • Dramatically increases the volume of fuel displaced by the HPFP
  • Maintains higher pressures under demanding situations
  • Fully rebuilt in house
  • Fully machine tested and broken in before shipping
  • Rebuilds your factory pump
  • Upgraded and weight matched spring
  • DLC coated piston
  • Heat-treated bearing-grade stainless steel material
  • Supports big power
  • .00004" dimensional tolerances
  • .00005" geometrical tolerances
  • Seals replaced
More Information
PartAPR MS100062
Barcode810904030863
Manufacturer Part NumberMS100062
BrandAPR
Emission Code4
Part TypeHigh Pressure Fuel Pump
Typeproduct

Tested
Yes
Rebuild
Yes
Quantity
1
New Seals
Yes
New Spring
Yes
Larger Bore
Yes
Product Type
High Pressure Fuel Pump
Emission Code
4
Larger Piston
Yes
Piston Coating
DLC
New Or Rebuilt Pump
Rebuild
Piston / Bore Material
Bearing-Grade Stainless Steel

Write Your Own Review
You're reviewing:APR High Pressure Fuel Pump - 2.5 TFSI (Rebuild)
Your Rating
Related Products
AF919-04-02BLK - 45° NPT Swivel to Male AN Flare Adapter 1/8" to -4AN
AF919-04-02BLK - 45° NPT Swivel to Male AN Flare Adapter 1/8" to -4AN
$29.75
AF932-04BLK - NPT Plug 1/4"
AF932-04BLK - NPT Plug 1/4"
$5.58
AF945-16 - 45° ORB Swivel to Male Flare Adapter -16 to -16
AF945-16 - 45° ORB Swivel to Male Flare Adapter -16 to -16
$46.48
AF921-10BLK - Fuel Cell Fitting -10AN
AF921-10BLK - Fuel Cell Fitting -10AN
$36.23
AF924-10S - Bulkhead Nut -10AN
AF924-10S - Bulkhead Nut -10AN
$7.24
ORB to AN Straight Male Flare Adapter, -12 ORB to -4AN, Black Finish
ORB to AN Straight Male Flare Adapter, -12 ORB to -4AN, Black Finish
$17.02
AF903-06-08BLK - 90° ORB to Male AN Full Flow Adapter -8 ORB to -6AN
AF903-06-08BLK - 90° ORB to Male AN Full Flow Adapter -8 ORB to -6AN
$22.25
AF9201-175 - Straight Silicone Hose 1-3/4" (45mm) I.D
AF9201-175 - Straight Silicone Hose 1-3/4" (45mm) I.D
$9.20
Blow-Off Valve Block-Off Plug - 25mm Silver Finish
Blow-Off Valve Block-Off Plug - 25mm Silver Finish
$16.04
XPRO Black 8.5mm Spiral Core Spark Plug Wire - 5m length
XPRO Black 8.5mm Spiral Core Spark Plug Wire - 5m length
$78.71
People Also Viewed
AF806-20BLK - AN Flare Plug -20AN
AF806-20BLK - AN Flare Plug -20AN
$37.23
AF157-07BLK - Billet Aluminium P-Clamp 7/16" (11.1mm)
AF157-07BLK - Billet Aluminium P-Clamp 7/16" (11.1mm)
$7.88
Concave Brass Olive Inserts -3AN Suits Hardline to flexible clip
Concave Brass Olive Inserts -3AN Suits Hardline to flexible clip
$17.24
HyperSpark Distributor - Ford (351-C/429/460)
HyperSpark Distributor - Ford (351-C/429/460)
$664.10
AFNITRO2HOOD-XL - Aeroflow 'Nitro Hemi' Hoodie - X-Large
AFNITRO2HOOD-XL - Aeroflow 'Nitro Hemi' Hoodie - X-Large
$82.50
AF156-10R - Billet Aluminium Dual Hose Separators
AF156-10R - Billet Aluminium Dual Hose Separators
$17.52
Mr. Gasket Hood & Deck Pinning Kits - With Screw-On Scuff Plates
Mr. Gasket Hood & Deck Pinning Kits - With Screw-On Scuff Plates
$25.54
Holley Sniper EFI 4150 Super Sniper 1250
Holley Sniper EFI 4150 Super Sniper 1250
$3,419.89
Haltech Elite CAN Cable DTM-4 to DTM-4 Length: 1200mm (48")
Haltech Elite CAN Cable DTM-4 to DTM-4 Length: 1200mm (48")
$77.56
AF98-2012 - Billet Dzus Fastener Tool
AF98-2012 - Billet Dzus Fastener Tool
$43.51
Copyright © 2020-present Race Car Engineering. All rights reserved.