APR High Pressure Fuel Pumps - S5 4.2L V8 (Pre Nov 2008)

Contact for Price
Out of Stock - Call to check
Part
APR MS100076
Contact for Price
Upgrade your direct injection high pressure fuel pump for dramatically more fuel volume needed on high powered applications.

The APR High Pressure Fuel Pump (HPFP) dramatically increases the maximum volume of fuel the HPFP can deliver. In doing so, the direct injection fueling system is capable of satisfying fueling requirements set forth by high horsepower setups. This is accomplished by increasing the displacement of the pump using high quality components to exacting tolerances.

How the direct injection system works:

A low pressure fuel pump (LPFP) in the fuel tank delivers fuel to the high pressure fuel pump (HPFP) at roughly 4 to 6 bar. Fuel pressure is then bumped up to a maximum of 136 bar, depending on factory parts, with the HPFP. Finally, high pressure fuel is delivered to the injectors, which spray directly into the cylinders.

The problem:

The volume of fuel the HPFP pump can displace is directly tied to the displacement of the pump (Internal bore size, and camshaft dictated stroke), and engine speed. The pump is driven off of a camshaft. Upgraded supercharger and turbocharger systems are capable of taxing this system, especially in the mid to lower RPM range where fuel volume is lower.

The APR solution:

We dramatically increase the volume of fuel the HPFP can displace at every RPM by increasing the displacement of the HPFP. This is accomplished by increasing the bore diameter of the pump's internal pressurizing cylinder. It's important to understand, despite the name, a HPFP upgrade is not necessary designed to increase the engine's fuel rail pressure. The primary goal is to increase the volume of fuel available, which will keep fuel pressure steady even in the most demanding of situations!

High quality components and extreme tolerances:

The HPFP internals must be machined to extreme tolerances and installed in a clean environment or the pump can easily fail. Dimensional tolerances on the APR HPFP are as tight as .00004" and geometric tolerances are as tight as .00005". The plunger and barrel are created from certified and heat-treated bearing-grade stainless steel and the plunger undergoes a special diamond like coating process for exceptional surfaces hardness and ultra-reliable operation. to prevent float associated with altering the plunger's mass, APR supplies each unit with a properly specified spring. All internal seals are replaced, including the spring seal, and the tip of the pump retains the factory pivoting head to reduce cam follower wear and piston side loading.

Internal testing:

All APR HPFPs are assembled in house under strict assembly guidelines. Each pump is then tested on our test rig to ensure the pumps operate as designed. This step is important for several reasons. It's critical in determining if a pump has a failure from incorrect install, a leaking seal, or a bad solenoid. Secondly, a seized pump on the vehicle at startup can cause damage to the engine's camshaft. By testing each pump, we all but eliminate these possibility.

Proven track record:

APR pioneered HPFP upgrades in the early days of VAG direct injection engines. Soon after, APR became an OEM supplier of HPFP and GDI components to VAG for use in various race cars, racing series, project cars, and concept vehicles. The APR HPFP has been at the center of countless motorsport victories across the globe and has operated with a nearly perfect tract record since the program's motorsport backed inception in 2006. With tens of thousands of pumps sold, APR has a wealth of knowledge, and manufacturing expertise necessary to deliver a product that will and has stood the test of time.

This kit included two new rebuilt pumps.

APR High Pressure Fuel Pumps - S5 4.2L V8 (Pre Nov 2008) Features

  • Dramatically increases the volume of fuel displaced by the HPFP
  • Maintains higher pressures under demanding situations
  • Fully rebuilt in house
  • Fully machine tested and broken in before shipping
  • New factory pumps included
  • Upgraded and weight matched spring
  • DLC coated piston
  • Heat-treated bearing-grade stainless steel material
  • Supports big power
  • .00004" dimensional tolerances
  • .00005" geometrical tolerances
  • Spring seals replaced
More Information
PartAPR MS100076
Barcode810009931959
Manufacturer Part NumberMS100076
BrandAPR
Emission Code4
Part TypeHigh Pressure Fuel Pump
Typeproduct

Tested
Yes
Rebuild
No
Quantity
2
New Seals
Yes
New Spring
Yes
Larger Bore
Yes
Product Type
High Pressure Fuel Pump
Emission Code
4
Larger Piston
Yes
Piston Coating
DLC
New Or Rebuilt Pump
New
Piston / Bore Material
Bearing-Grade Stainless Steel

Write Your Own Review
You're reviewing:APR High Pressure Fuel Pumps - S5 4.2L V8 (Pre Nov 2008)
Your Rating
Related Products
AF9003-075 - 90° Silicone Hose Elbow 3/4" (19mm) I.D
AF9003-075 - 90° Silicone Hose Elbow 3/4" (19mm) I.D
$21.00
Plumb Back Barb AdaptersBlack Suit 30mm Hose
Plumb Back Barb AdaptersBlack Suit 30mm Hose
$29.28
ORB to AN Straight Male Flare Adapter, -16 ORB to -10AN, Silver Finish
ORB to AN Straight Male Flare Adapter, -16 ORB to -10AN, Silver Finish
$24.17
AF849-10-08 - ORB Taper Swivel 90° Hose End -8AN to -10AN
AF849-10-08 - ORB Taper Swivel 90° Hose End -8AN to -10AN
$54.72
AF9205-300 - 135° Silicone Hose Elbow 3" (75mm) I.D
AF9205-300 - 135° Silicone Hose Elbow 3" (75mm) I.D
$60.48
AF903-03S - 90° ORB to Male AN Full Flow Adapter -3 ORB to -3AN
AF903-03S - 90° ORB to Male AN Full Flow Adapter -3 ORB to -3AN
$19.75
400 Series Blue Push Lock Hose -4AN 2 Metre Length
400 Series Blue Push Lock Hose -4AN 2 Metre Length
$38.24
AF924-03 - Bulkhead Nut -3AN
AF924-03 - Bulkhead Nut -3AN
$3.76
Simpson Racing SA2020 Carbon Bandit Racing Helmet
Simpson Racing SA2020 Carbon Bandit Racing Helmet
$1,699.03
ORB to AN Straight Male Flare Adapter, -10 ORB to -4AN, Black Finish
ORB to AN Straight Male Flare Adapter, -10 ORB to -4AN, Black Finish
$9.87
People Also Viewed
3-Bolt Embossed Copper Flange Gasket Suit 2.5" Flange (Pair)
3-Bolt Embossed Copper Flange Gasket Suit 2.5" Flange (Pair)
$11.15
AF583-12 - 90° Full Flow Female Coupler -12AN
AF583-12 - 90° Full Flow Female Coupler -12AN
$74.73
AF5500-300 - 3" Offset/Offset SS Muffler
AF5500-300 - 3" Offset/Offset SS Muffler
$152.98
AF460-32PUR - 2" Billet Aluminium Weld-On Filler with Purple Cap
AF460-32PUR - 2" Billet Aluminium Weld-On Filler with Purple Cap
$64.21
AF554-06-08BLK - 550 Series Cutter Style Swivel 120° Stepped Hose End -8AN to -6 Hose
AF554-06-08BLK - 550 Series Cutter Style Swivel 120° Stepped Hose End -8AN to -6 Hose
$77.22
AF923-03-02BLK - 90° Male NPT to Female AN Adapter 1/8" to -3AN
AF923-03-02BLK - 90° Male NPT to Female AN Adapter 1/8" to -3AN
$34.21
BOOSTED 7975 V-Band 1.28 Turbocharger 1450HP, Natural Cast Finish External Wastegate, V-Band Inlet & Exhaust Flanges
BOOSTED 7975 V-Band 1.28 Turbocharger 1450HP, Natural Cast Finish External Wastegate, V-Band Inlet & Exhaust Flanges
$1,550.24
Aeroflow AF926-10-08 -8 ORB to 16mm Barb Blue 100mm OAL AF926-10-08
Aeroflow AF926-10-08 -8 ORB to 16mm Barb Blue 100mm OAL AF926-10-08
$25.75
Replacement Cap and Rotor for Pro Mag, Black
Replacement Cap and Rotor for Pro Mag, Black
$190.61
XPRO Silicone 90° Socket Style Distributor/Coil Boots & Terminals - Black - 2 pack
XPRO Silicone 90° Socket Style Distributor/Coil Boots & Terminals - Black - 2 pack
$13.97
Copyright © 2020-present Race Car Engineering. All rights reserved.