Atomic AirForce LT1 Intake Manifold, Red

$2,899.90
Out of Stock (Temp) - Call to check Temporarily Out of Stock - Call to Check
Part
Atomic 2700
Performance, polymer intake manifold for GM LT1 engines.

The MSD Atomic AirForce intake manifold delivers improved airflow and distribution to improve the performance of stock and modified engines.

The unique bell-mouthed runner entrances maximize airflow and minimize shrouding - all while optimizing the available plenum volume for an unobstructed flow path over opposing runners. The polymer molded 2-piece design allows for easy access to the runners for porting.

The Atomic AirForce LT1 manifold accepts OEM Drive-By-Wire (DBW) and aftermarket Big-Bore DBW throttle bodies - as well as cable operated throttle bodies. Auxiliary fuel rails and port injectors may also be fitted for applications where the capacity of the stock Gasoline Direct Injection (GDI) system has been exceeded. The intake is supplied with new OEM-style bolts, but the use of new OEM-style intake port seals is required.

Atomic AirForce LT1 Intake Manifold, Red Features

  • CARB Approved, 50 State Legal EO# D-722-3
  • Designed using Computational Fluid Dynamic Modeling to create optimal plenum volume and efficient air flow paths
  • The two-piece manifold design provide convenient access to the runners for porting
  • Direct flow path runner design promotes maximum airflow
  • 103mm Throttle bore allows the use of large throttle bodies for greater air flow
  • Polymer material resists heat soak and minimizes weight
  • Allows for the use of stock, and aftermarket fuel rails
  • Available with Red, Black and Silver logos
More Information
PartAtomic 2700
Manufacturer Part Number2700
BrandAtomic
ColorSilver
EngineGM LT1
Emission Code1
FinishBlack
Fuel System TypeEFI
Injector Style ProvisionLS3/L92 EV6 USCAR
Part TypeIntake Manifold
Throttle Bore103mm
Typeproduct

Color
Red
Engine
GM LT1
Finish
Black
Construction
Polymer
Product Type
Intake Manifold
C.A.R.B. Eo #
D-722-3
Emission Code
1
Throttle Bore
103mm
Fuel System Type
EFI
Injector Style Provision
LS3/L92 EV6 USCAR
Plenum Volume With Runners
11.22L (684.7 c.i.)
Plenum Volume Without Runners
206.4mm (8.125in)

Write Your Own Review
You're reviewing:Atomic AirForce LT1 Intake Manifold, Red
Your Rating
Related Products
Holley Modular Lo-Ram EFI Manifold LS1/2/6
Holley Modular Lo-Ram EFI Manifold LS1/2/6
$1,867.89
Holley Single Plane Split-Design Race Intake Manifold- GM LS3/L92-4150
Holley Single Plane Split-Design Race Intake Manifold- GM LS3/L92-4150
$1,068.63
Holley Hi-Ram Lower Manifold - GM LS3/L92
Holley Hi-Ram Lower Manifold - GM LS3/L92
$1,615.89
Holley LS Hi-Ram EFI Manifold - Black
Holley LS Hi-Ram EFI Manifold - Black
$2,339.89
Holley LS Hi-Ram EFI Manifold - Black
Holley LS Hi-Ram EFI Manifold - Black
$2,195.88
Holley Hi-Ram Intake - Black
Holley Hi-Ram Intake - Black
$2,339.89
Holley Single Plane EFI Split-Design Race Intake Manifold- GM LS3/L92
Holley Single Plane EFI Split-Design Race Intake Manifold- GM LS3/L92
$1,184.86
Holley Single Plane Split-Design Race Intake Manifold- GM LS1/LS2/LS6- Black
Holley Single Plane Split-Design Race Intake Manifold- GM LS1/LS2/LS6- Black
$1,184.89
Holley Single Plane EFI Intake - GM LS3/L92
Holley Single Plane EFI Intake - GM LS3/L92
$796.76
Holley Single Plane EFI  Split-Design Race Intake Manifold- GM LS1/LS2/LS6
Holley Single Plane EFI Split-Design Race Intake Manifold- GM LS1/LS2/LS6
$1,263.13
People Also Viewed
AF557-06-08S - 550 Series Cutter Style Swivel 30° Stepped Hose End -8AN to -6 Hose
AF557-06-08S - 550 Series Cutter Style Swivel 30° Stepped Hose End -8AN to -6 Hose
$59.74
AF156-07T - BILLET DUAL HOSE SEPARATOR
AF156-07T - BILLET DUAL HOSE SEPARATOR
$15.91
AF8601-225L - Straight Aluminium Tube 2-1/4" (57mm) Dia. 3.3ft (1 Meter) Length. 5/64" (2.03mm) Wall
AF8601-225L - Straight Aluminium Tube 2-1/4" (57mm) Dia. 3.3ft (1 Meter) Length. 5/64" (2.03mm) Wall
$57.06
AF719-04S - Alloy AN Banjo Fitting 12mm to -4AN
AF719-04S - Alloy AN Banjo Fitting 12mm to -4AN
$39.54
Turbo Inlet Flange GasketSuit T5 Twin Entry Flange, Single Layer Embossed Steel
Turbo Inlet Flange GasketSuit T5 Twin Entry Flange, Single Layer Embossed Steel
$8.33
AF823-08-08S - 45° NPT to Male Flare Adapter 1/2" to -8AN
AF823-08-08S - 45° NPT to Male Flare Adapter 1/2" to -8AN
$17.99
AF9502-1750 - SS Bend, 45° 1-3/4" O.D, .065" Wall, 6" Leg
AF9502-1750 - SS Bend, 45° 1-3/4" O.D, .065" Wall, 6" Leg
$28.17
AF989-04S - Steel Weld-On K-Style EGT Bung & Cap
AF989-04S - Steel Weld-On K-Style EGT Bung & Cap
$22.25
AF829-12-12S - Male NPT Taper Swivel 90° Hose End 3/4" to -12AN
AF829-12-12S - Male NPT Taper Swivel 90° Hose End 3/4" to -12AN
$67.23
AF575-10DBLK - 570 Series One-Piece Full Flow 150° Hose End -10AN
AF575-10DBLK - 570 Series One-Piece Full Flow 150° Hose End -10AN
$69.93
Copyright © 2020-present Race Car Engineering. All rights reserved.